| PART |
Description |
Maker |
| LTC3723-2 |
Synchronous Push-Pull PWM Controllers
|
Linear Technology
|
| BS62LV1027 BS62LV1027PIP70 BS62LV1027SCG70 BS62LV1 |
Asynchronous 1M(128Kx8) bits Static RAM
LM5035 PWM Controller with Integrated Half-Bridge and SyncFET Drivers; Package: TSSOP EXP PAD; No of Pins: 20
LM5041A Cascaded PWM Controller; Package: TSSOP; No of Pins: 16
LM5041 Cascaded PWM Controller; Package: TSSOP; No of Pins: 16
Very Low Power/Voltage CMOS SRAM 128K X 8 STANDARD SRAM, 55 ns, PDSO32
Very Low Power/Voltage CMOS SRAM 128K X 8 STANDARD SRAM, 55 ns, PDIP32
Very Low Power/Voltage CMOS SRAM 非常低功电压的CMOS的SRAM
LM5033 100V Push-Pull Voltage Mode PWM Controller; Package: LLP; No of Pins: 10 128K X 8 STANDARD SRAM, 70 ns, PDSO32
LM5030 100V Push-Pull Current Mode PWM Controller; Package: LLP; No of Pins: 10 128K X 8 STANDARD SRAM, 55 ns, PDIP32
LM5030 100V Push-Pull Current Mode PWM Controller; Package: LLP; No of Pins: 10 128K X 8 STANDARD SRAM, 70 ns, PDIP32
Very Low Power/Voltage CMOS SRAM 128K X 8 STANDARD SRAM, 70 ns, PDSO32
Very Low Power/Voltage CMOS SRAM 128K X 8 STANDARD SRAM, 70 ns, UUC
|
http://
BSI[Brilliance Semiconductor]
BRILLIANCE SEMICONDUCTOR, INC.
BRILLIANCE SEMICONDUCTOR INC
|
| SI9124DQ-T1 |
500-kHz Push-Pull DC-DC Converter With Integrated Secondary Synchronous Rectification Control 500千赫推挽式直流与集成的次级同步整流控制DC转换
|
Vishay Intertechnology, Inc.
Vishay Intertechnology,Inc.
|
| DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
| RFPP3870 |
GaAs/GaN Push Pull Hybrid GaAs/GaN Push Pull Hybridz
|
RF Micro Devices
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| MAX6713Z MAX6713T MAX6713S MAX6713R MAX6713M MAX67 |
Microprocessor reset circuit with manual reset input. Reset threshold 2.63V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 4.38V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 4.63V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low open-drain reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-high push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low push-pull reset.
4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4
8-Bit Shift Register 16-SOIC -40 to 125 4引脚、SC70微处理器复位电路，带有手动复位输
8-Bit Shift Register 16-PDIP -40 to 125 4引脚、SC70微处理器复位电路，带有手动复位输
|
Maxim Integrated Produc...
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maixm
Maxim Integrated Products, Inc.
|
| FP203 |
Push-Pull Circuits
|
Sanyo Semicon Device
|
| MTD2003G MTD2003GE MTD2003G-17 |
Dual Full-bridge PWM Stepper Motor Driver
Constant Current Control Function (Fixed Frequency PWM Control)
|
Shindengen Electric Mfg.Co.Ltd
Shindengen Electric Mfg...
|
| ADM1815-10AKS-REEL ADM1815-10AKS-RL7 ADM1815-10ART |
Microprocessor Supervisory in SOT-23 with Active Low Push-Pull Output Choices
Microprocessor Supervisory in SOT-23 with Active High and Low Push-Pull Output, Positive Reset Output
Microprocessor Supervisory in SOT-23 with Low Active OpenDrain Output Choices
Microprocessor Supervisory in SOT-23 with Active Low Open Drain Output Choices
Microprocessor Supervisory in SOT-23 with Active High Push-Pull Output
Microprocessor Supervisory in SOT-23 with Open Drain Output Choices
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
|
ANALOG DEVICES INC
|
| 809-083 |
Push-Pull Mighty Mouse
|
Glenair, Inc.
|
| DRF1301 |
MOSFET Push-Pull Hybrid
|
Microsemi Corporation
|
|
